1 auto preset memory, Notes, 2 auto tuning – Denon AVR-2500 User Manual
Page 18: 3 manual tuning, 4 preset memory, Listening to the radio, I i i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^ LISTENING TO THE RADIO
5-1 Auto preset memory
This unit is equipped with a function for automatically searching
for FM broadcast stations and storing them in the preset memory.
1, Press the POWER button while holding in the MEMORY
button.
The
unit
automatically
begins
searching
for
FM
broadcast stations.
POWER
ON/STANDBY
2. When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1. Subsequent
stations are automatically stored in order at preset channels
A2 to A8, 81 to B8, C1 to C8 and D1 to 08, for a maximum of 32
stations.
3. Channel A1 is tuned in after the auto preset memory operation
is completed.
NOTES:
•
If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the
station, then preset it using the m'anuai "Preset memory"
operation.
• RDS stations are stored in the memory with priority.
5-2 Auto tuning
1. Set the input function to "TUNER".
AUDI'
TUNER
Set the slide switch to
"AUDIO".
AUDIO
AVRiAVC VIDEO"
2. Watching the display, press the BAND button to select the
desired band (AM or FM).
TUNNING -------------
I—I
MODE SAND
3. Press the MODE button to set the auto tuning 4. Press the TUNING UP or DOWN button,
mode.
TUNNING -------------
MODE
"AUTO" appears on the display.
If tuning does not stop at the desired station, use to the "Manual tuning" operation.
I I I
DOWN UP^ii_^
Automatic
searching
begins,
then
stops
when a station is tuned in,
GD CID CD O
Q © Q O
® CD GD CD
® | S czf £
d
VOP/tV
iVNt«
© © ® S
® ® ® ®
5-3 Manual tuning
1. Set the input function to "TUNER".
2. Watching the display, press the BAND button to select the
desired band (AM or FM).
3. Press the MODE button to set the manual tuning mode.
Check that the display's "AUTO" indicator turns.
4. Press the TUNING UP or DOWN button to tune in the desired
station.
The frequency changes continuously when the button is held
in.
5-4 Preset memory
1. Use the "Auto tuning" or "Manual tuning" operation to tune in
the station to be preset in the memory.
2, Press the MEMORY button.
MEMORY
18