Denon DN-730R - Manual (Page 3)

ICDN-ySORI
i'SPECIFICATICMSIS
Type
Heads
Motors
Tape Speed
Variable (PLAY)
Fast Forward,
Rewind Time
Flecording Bias
Overall S/N Ratio
(at 3% THD
Overall Frequency
Response
Channel Separation
Crosstalk
Wow & Flutter
Inputs
Line
Outputs
' Line
Headphone
Power supply
Power Consumption
Dimensions
Weight
Installation _
Vertical tape loading; 4-track 2-channel
stereo cassette deck
Recording/playback head (amorphous) X 1
Erase head (Double-gap ferrite) X 1
Capstan (DC servo motor) X 1
Reel (DC motor) X 1
4.8 cm/sec. (FIX)
Approx. ±12%
Approx. 110 sec. with a C-60 cassette
Approx. 105 kHz
Dolby t NR on: more than 74 dB (CCIR/ARM)
25-19,000 Hz ±3 dB (at —20 dB, Metal tape)
More than 40 dB (at 1 kHz)
More than 65 dB (at 1 kHz)
0.055% WRMS (JIS method), ±0.14% w. peak
80 mV (—20 dBm) input level at maximum
Input impedance: 50 kohm unbalanced
775 mV (0 dB) output level at maximum
(with 47 kohm load, recorded level of
200 pwb/mm)
1.2 mW output level at maximum
(optimum load impedance
8 ohm-1.2 kohm)
Voltage is shown on rating label
16 W
482 (W) X 134 (H) X 275 (D) mm
4.7 kg
19-inch rack mountable (3U)
Above specifications and design styling are subject to change for
improvement.
Dolby noise reduction and HX Pro headroom extension manufactured
under licence from Dolby Laboratories Licensing Corporation. HX Pro
originated by Band & Olufsen.
"DOLBY", the double-D symbol □□ and "HX PRO" are trademarks of
Dolby Laboratories Licensing Corporation.
Best results will be obtained with use of DENOIM DX and HD Series cassette
tapes.