Loading batteries, Operating with the remote control – Toshiba SD-1200U User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading batteries
Notes on batteries
Improper use of batteries may cause battery leakage and
corrosion. To operate the remote controi correctly, follow the
instructions beiow.
• Do not insert batteries into the remote control in the wrong
direction.
• Do not charge, heat, open, or short-circuit the batteries.
Do not throw batteries into a fire.
• Do not leave dead or exhausted batteries in the remote
control.
• Do not use different types of batteries together, or mix old
and new batteries.
• If you do not use the remote control for a long period of
time, remove the batteries to avoid possibie damage from
battery corrosion.
• If the remote control does not function correctly or if the
operating range becomes reduced, replace all batteries
with new ones.
• If battery leakage occurs, wipe the battery liquid from the
battery compartment, then insert new batteries.
Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
Within about 7 m (23 feet)
I
Distance: About 7 m (23 feet) from the front of the
remote sensor
Angle:
About 30° in each direction of the front of
the remote sensor
* Do not expose the remote sensor of the DVD video
player to a strong light source such as direct
suniight or other iiiumination. If you do so, you may
not be able to operate the DVD video player via the
remote controi.
o
a
a
o'
Notes on the remote control
• Direct the remote control at the remote sensor of the DVD
video player.
• Do not drop or give the remote control a shock.
• Do not leave the remote control near an extremely hot or
humid piace.
• Do not spili water or put anything wet on the remote
control.
• Do not open the remote control.
15