Kenwood EM 618 - Manual (Page 7)

Setting Cell Information
This function aUows you to monilof text messages which are broadcastod by the network,
function «(topendeni on your tubocnpOon as well as your network operator
Cell Info
T.«f|f
Disabled
J Press cX> or C3? from "Change Phone
'— Settings" (page 54) until "Cell Info"
appears with the current setting.
2 To turn Cell Info on or off, press [Enable]
or [Disable].
*Cetl Info has been En^ed* or "Cetl Irrto has been Disabled'
wiU appear.
Selecting a Compatible Network
When you switch the phone on, N normally selects your home network However, if your home network
is not avaliabie (while using the phone overseas, for example), your phor>e wiH find a compabbte
network that you are решнПеО to roam in. The SIM card contalna a bat of networks that the phone can
conrtect to. You can configure your phone to select a rtatwork automatlcalfy (networks In the Ust wtth
an acceptable stgnaf strength) or manuafty You can also add and remove rietworks from the provided
Ifsl
Press or <3^ from "Chonge Phone
Settings" (page 54) until "Network
Selection" oppeors with the current
setting.
Network
Selection
Manual
^ Press [Change].
The network selection menu will et 4 >ear
T^ll
fanuai
Edit Ust
Press CX) or dP to highlight
"Automatic", "Manual", or "Edit Ust”.
>AutomaHc/Manual/Edit List
• Automatic allows you to eutomaticalty search for a network
• Manual allows you to select a retwork manually.
• You can new trie network list, remove a network from the list, or add a
network to the lei. When adding a network to the list, you must enter
the mobile country code (MCC) and the mobile network code (MNC)
These codes are used by the network for identification
67