Uniden UH-055 - Manual (Page 4)

CONTROLS AND THEIR FUNCTIONS
\
V
to llfi^
^ II»"
«1
MOOVOtt hu O'NT lo gM-000
wwww
I
1. CHANNEL LAMP SWITCH: If desired to know proper channel No. in the night opera­
tion. turn on this switch, the channel light will light and be able to read it out clearly.
2. PRESS-TO-TALK SWITCH: This will changeover the mode to either transmit or re­
ceive. Depress it to fall in the transmit mode, and release to return to the receive mode.
3. POWER HI-LOW SWITCH: This selects the RF output power. In High mode, the output
power is 2.5W (rated output) and LOW 350mW.
In LOW mode, power consumption is decreased to enable a long hours of operation.
For a short distance communication, it is suggested to operate on low power.
-
4
-