Kenwood SPECTRUM 1050 AV User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

9 If the center channel is not the same volume as the

left and right speakers, use_the ► and M buttons to

adjust

plays the test noise at the same volume.

The test noise stops cycling and remains in the center

channel while it's being adjusted.

The integrated amplifier displays the level of the

center channel while It's being adjusted.

10 If the surround channel Is not the same volume as the

other speakers, use the >► and buttons to adjust

it so it plays the test noise at the same volume.

The test noise stops cycling and remains in the

surround channel while it’s being adjusted.

The integrated

amoUfier

displays

the level

of the

surround cnannei

while

it's being adjusted.

11 When all of the channels sound like they’re the same

volume, you've balanced your system.

12 Press the FUNCTION button on the remote to turn

off the test noise.

You can also make the adjustments by using the

CENTER LEVEL and REAR LEVEL buttons on the inte

grated amplifier's front panel (but it's easie-" w'lth the

remote because you can sit in the listening area).