Kenwood SPECTRUM 1050 AV - Manual (Page 19)

Connecting your antennas
<
The quality of your FM./AM recep­
tion depends on how well you piace
your antennas. So please foliow the
instructions carefuily.
Connecting the antenna wires
to the antenna jacks
I Unlock lever
2 Insert wire
3 Lock lever
Using the AM indoor loop antenna (supplied)
Place the antenna as far away as possible from the main system, television,
speaker wires, and power cords.
Rotate the antenna until you get the best reception.
Using the FM indoor antenna (supplied)
Use this antenna until you can install an outdoor antenna. When you do,
remove the indoor antenna.
1 Remove the insulation from the wire tip, and twist the wire tightly to get
nd of any loose strands.
2 Connect the end of the wire to the left-most antenna jack on the inte­
grated amplifier.
3 Fully extend the antenna, and piace it along a wall or bookshelf.
4 Adjust the antenna to find the position that provides the best reception.
5 Attach the looped end to the wall or bookshelf.
19
.