2,4.2 usinq co£' v ^ j, Sifi' , ' h^nposlte video, 4 connectinq your вз' i < из вок – Vizio VX20L User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VX20L HDTV User Manual
2.4 Connectinq Your Вз' i < из Вок
/• ' ' 'sifi' , ' H^nposlte Video
Щ -
1.
Turn off the power to the HDTV and Set-Top Box.
2.
Using the AV Cable, connect the Video (yellow color)
connector on your Set-Top Box to the corresponding Video
(yellow color) connector in the AV1 group (yellow color area)
at the rear of the HDTV,
3.
Using the white and red connectors, connect the cable to
the audio output connectors associated with the Video
output on your Set-Top Box and connect the other end to
the audio connectors associated with the AV1 input (yellow § ,
color area) at the rear of the HDTV.
4.
Turn on the power to the HDTV and Set-Top Box.
5.
Select AV-C using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
2,4.2 Usinq Co£' V ^ J
1.
2.
3.
4.
or.fj
PC
‘m
«I
Turn off the power to the HDTV and Set-Top Box.
Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box
and the other end to the DTV/TV input at the rear of the HDTV.
Turn on the power to the HDTV and Set-Top Box.
Select TV using the INPUT button on the remote or side of the HDTV, or directly by
pressing the TV button (below the WIDE button) on the Remote Control.
.x-
Note: Refer to your Set Top Box user manual for more information
about selecting the video or RF output of the product.
Version 5/4/2007
20
О