For pi./ . ' ' iokes with ovi – Vizio VX20L User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VIZIO VX20L HDTV User Manual
For P i . /
. ' ' ioKes with OVI:
HDÌ4I 'S.
mmmmm
iii; \
* #
|i^a
!•,
J
e
■
Ì "
1.
Turn off the power to the HDTV and HDTV Set-Top Box.
2.
Using a HDMI-DVI cable, connect the DVI end to your HDTV Set-Top Box and the HDMI end
to the HDMI Input (white color area) at the rear of the HDTV,
3.
Using an audio cable (white and red connectors), connect
the cable to the audio output
connectors associated with the DVI output on your HDTV Set-Top Box and connect the other
end to the audio connectors associated with the HDMI input (white area) at the rear of the
HDTV.
4.
Turn on the power to the HDTV and HDTV Set-Top Box.
5.
Select HDMI using the INPUT button on the remote or side of the HDTV, or directly by
pressing the HDMI button on the Remote Control.
Note: The HDIVfl Input is for HD Video and will only support 640x480 at 60Hz from a PC. Use the RGB
PC input for a greater selection of PC formats.
Note:
a)
tai
The HDMI input on the HDTV suppods High-bandv/.dth Digital Content Protection
; (MDCP:)../ i ;MpCP: ehcrypts; Itheytransmisisiph fbiet^^
iVideo: I sipufce ; and: ■
dig4ai display for added security and protection.
Refer to your HDTV Set-Top Box user manual for more information about the
V deo output requirements of the product or consult your cable or satellite operator.
Version 5/4/2007
18
o