Bose RoomMate II - Manual (Page 4)

How to Use Your
RoomMate' II
System
Hooking up
Befae you plug the RoomMate II
system into your wall outlet (AC
mains) or your battery power supply
(DC), make sure that the following
connections have been made
properly and that the volume control
on your audio source (personal
stereo. CD player, keyboard, etc.) is
turned all the way down.
A. Carefully identify the two separate
speakers. The LEFT (POWERED)
speaker has the AC (wall current
or mains) and DC battery input
jacks, auxiliary input connectors,
and speaker terminals located on
the back. The RIGHT (COMPAN­
ION) speaker has speaker
terminals.
Use the enclosed two-conductor
speaker wire to connect the
terminals on the LEFT speaker
with those on the RIGHT speaker.
The conductor with the RED stripe
should be connected to the RED
terminal on the back of each
speaker. The remaining all-BLACK
conductor should be ccxinected to
the BLACK terminal on each
speaker.
B. For AC (mains) power use. attach
the enclosed line (mains) cord to
the AC jack on the LEFT (POW­
ERED) speaker and set the
vdtage selector switch (if appli­
cable) to the correct AC voltage.
Use the 115V setting for North and
Central America and the Carib­
bean. or the 230V setting for
Europe. UK. Ireland, and Australia:
and 100V in Japan.
Insert the AC power (mains) cord
plug into your wall outlet.