Fisank, Hold, Deleting a stored frequency – Uniden UBC220XLT User Manual

Page 17: Deleling a stored frequency, Bs.bsoo

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press (D to store the entry. The channel number on

the display stops blinking.

fiSANK

]BS.BSOO

AIR

HOLD

If that frequency is already stored in another channel,

you will hear a “beep“, and the duplicate channel

number will appear on the display.

If you want to store the frequency in the selected

channel (18) as well, press (i) again. Or, press @

and enter another frequency for the currently selected

channel. The channel number on the display slops
blinking.

Note:

Any frequency already stored in any channel

will automatically be replaced by the new one.

If you try to enter a frequency that is outside one of the
10 Bands, you will hear a “beep", and the word “Error"

appears on the display.

bank

Press (J) and re-enter the correct frequency.

9. To program another channel, repeat the above

procedures.

Deleting a Stored Frequency

To delete a frequency from a channel:

Display the channel and frequency to be deleted.

Press (T) on the numenc keypad,

Press d). The current channel is erased, and the

display shows 000.000.

Note: That channel will be skipped during scanning.