Uniden UH-056 - Manual (Page 14)

To disable scanning:
iXMN
- when on an active channel, press the O Key and
the unit stays on the active channel.
U3=> DCWN
- while scanning, press the
O
or
O
Key. The unit
returns to the channel where scan function is acti­
vated.
- press the PTT switch. When the unit is on an active
channel, it transmits on the same channel.
When scanning, the unit transmits on the channel
where scan function is activated.
SCN indicator disappears from the LCD Display,
Drop Out Delay
While scanning, the radio stops at a busy channel and
receives a transmission. When the received call is over, the
unit will wait for three seconds for the return of the signal.
Otherwise it resumes scanning.
Create a Channel Scan List with Channel Lock-Out
Feature
You may have certain channels that you do not want to hear
every time you scan. These are channels that are busy in a
major portion of time, and the scanning stops at that
channel(s) often enough to interrupt the scan cycle. You
can Lock-out those channels so they are not scanned.
There are two ways to exclude channels from being
scanned:
DP OOM4
1.
UsingtheOoi" O
switches, manually select the
uo
desired channel and press the O button. The locked-
out channel blinks.
2. While scanning, when the unit stops on the channel you
wish to lock-out because of its too much activity, simply
VO
press the
O
Key and it will be automatically removed
from the scan list. Scanning resumes.
To remove the lock-out condition from a channel, manually
(JO
select the channel and press O button again. The channel
stops blinking.
UH-056 Page 12