Charging the battery pack – Uniden DS70 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Use only Uniden Battery

supplied with your phone.

INSTALLING THE HANDSET BATTERY PACK

1. Press and slide the battery cover off,

2. Align the plastic connector of the

Nickel Metal Hydnde battery with its socket

and plug it in.

3. Place the battery pack inside.

4. Slide the battery cover back

until it snaps into place.

CHARGING THE BATTERY PACK

Initial battery charging

Before connecting your phone for the first time, fully
charge the rechargeable battery pack for 15-20 hours

without interruption.

I. Place the handset on the base

2, Make sure that the

Charging

LED lights. If the LED doesn’t
light, check the AC adaptor is

plugged m and and switched

ON. Also check the handset has

good contact with the base

charging contacts.