Programming scan channels – Uniden UH-100 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming Scan Channels
1. Select which Scanning Mode you
wish to use on the channel,
OS or GS Mode
Note: OS is indicated by the
absence of the GS icon.
2. Select the channel you want to
store.
3. Press and hold MEM for 1.5 sec. to
store. MEM icon appears and a
short tone beep is heard.
4. To remove the channel from Memory, press and hold MEM for 1.5 sec. once more.
Two successive beeps are heard and the MEM icon disappears.
16