Casio PQ-65 - Manual (Page 3)

Operation Guide DQ-745/PQ-65
3
THERMOMETER FUNCTIONS
• A built-in sensor measures temperature and shows the measured value on the display.
• The temperature display shows “LO” for temperatures below –50 ° C (–58 ° F) and “HI” for temperatures above
70 ° C (158 ° F).
• Though temperature readings are displayed up to 0 ° C (32 ° F) and greater than 41 ° C (105 ° F), note that such
readings are actually outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
• Push the ° C/ ° F button ( 4 ) to select either Celsius ( ° C) or Fahrenheit ( ° F).
°C/°F button ( 4 )
° C ° F
Celsius ( °C) Fahrenheit ( °F)
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct
directions. If you load batteries incorrectly, they can burst and damage the clock.
4. Press the RESET button ( 6 ). Be sure to press the RESET button ( 6 ) after replacing batteries.
5. Replace the battery compartment cover.
Battery precautions
• Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician
immediately.
• Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.
• Never mix old and new batteries, or batteries of different brands.
• Never charge the batteries that come with the clock.
• Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
• Replace the batteries at least once a year, even if the current batteries are working properly.
• The batteries that come with the clock lose some of their power during transport and storage.