BRP DS70 - Manual (Page 81)

Oil Viscosity Chart
XP-S 5W 40 Synthetic Oil
(P/N 293 600 039)
SAE 0W 30
SAE 5W 30
SAE 10W 30
XP-S 10W 40 Mineral Oil
(P/N 219 700 346)
SAE 15W 40
SAE 20W 50
Temperature Range
50°C (122°F)
40°C (104°F)
30°C (86°F)
20°C (68°F)
10°C (50°F)
0°C (32°F)
- 10°C (14°F)
- 20°C (- 4°F)
- 30°C (- 22°F)
Engine Oil Level
CAUTION: Check level frequently
and refill if necessary. Do not over-
fill. Operating the engine with an
improper level may severely dam-
age engine. Wipe off any spillage.
vmo2008-008-021_a
TYPICAL — RH SIDE OF ENGINE
1. Dipstick
With vehicle on a level surface, start
engine and let it running for several
minutes, then stop engine check the
oil level as follows:
1.
Unscrew dipstick then remove it
and wipe clean.
2. Reinstall dipstick (do not screw it
in).
3. Remove and check oil level. It
should be near or equal to the up-
per mark.
vmo2008-020-007_a
1. Full
2. Add
3. Operating range
To add oil, remove dipstick. Place a
funnel into the dipstick hole to avoid
spillage.
Add a small amount of oil and recheck
oil level.
Repeat until oil level reaches the dip-
stick’s upper mark. Do not overfill.
Properly tighten dipstick.
_____________________
79