Prp ethernet connections – Cisco XR 12416 User Manual
Page 28
Chapter 2 Preparing for Installation
PRP Port Connection Guidelines
2-28
Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide
OL-17440-01
PRP Ethernet Connections
The PRP has two RJ-45 MDI Ethernet ports; ETH0 and ETH1 (
Figure 2-12
PRP Ethernet Connections
These connections support IEEE 802.3 and IEEE 802.3u interfaces compliant
with 10BASE-T and 100BASE-TX standards. The transmission speed of the
Ethernet ports is autosensing by default and is user configurable.
The PRP Ethernet port does not provide external routing functions. Its primary
roles are to act as a Telnet port into the router, and to boot or access Cisco IOS XR
software images over a network to which the PRP Ethernet port is directly
connected.
Caution
Cisco Express Forwarding (CEF) functions on these ports are switched off by
default for security reasons. We strongly caution you to consider the security
implications of switching on CEF routing functions on these ports.
RX
TX
PRIMARY
SLO
T-1
SLO
T-0
LINK
EN
RX
TX
ETH 1
ETH 0
LINK
PRIMARY
EN
70693