Compaq TFT 5000R - Manual (Page 17)

2-4 Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide
Compaq Confidential – Need to Know Required
Writer: Caroline Juszczak Project: Compaq Flat Panel Monitor Rackmount (TFT5000R) User Guide Comments:
Part Number: 141559-001 File Name: c-ch2 Installing the Monitor Last Saved On: 8/3/99 11:29 AM
10. Use your thumbs to push in on the tray cover tabs on the back of the
tray, then lift off the tray cover.
a. Remove any packing material.
b. Unbundle the VGA cord and thread it through the hole in the rear of
the tray.
c. Lift the AC adapter, remove the paper from the tape, then secure the
AC adapter to the tray.
d. Connect the power cord to the AC adapter and thread it through the
hole in the rear of the tray.
e. Replace the tray cover.
NOTE: Be sure these steps are completed BEFORE installing the tray assembly into the
rack.
Figure 2-5. Removing the tray cover