Installation – Pioneer AVIC50S User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
Parts supplied
O
GPS antenna
Metal sheet
Clamp (5 pcs.)
Waterproof pad
When installing the antenna inside the vehicle (on the dashboard or rear shelf)
Affix the metal sheet on as level a surface as possible where the GPS antenna faces outside
the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened
with its magnet.)
GPS antenna
Metal Sheet
Peel off the protective sheet
on the rear.
Make sure the surface is
free of moisture, dust,
grime, oil, etc., before
affixing the metal sheet.
Note: The metal sheet
contains a strong adhesive
and may leave a mark on
the dashboard if it is
removed.
Clamps
Use clamps to secure the
lead where necessary inside
the vehicle.
Note:
• Some models use window glass that does not allow signals from GPS satellites to pass through. On
such models, install the GPS antenna on the outside of the vehicle.