Installing the main unit – Pioneer AVIC50S User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the main unit
Installation notes
• Do not install the main unit in places where it may become subject to high temperatures
or humidity, such as:
* Places close to a heater outlet.
* Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf.
• Places that may be splashed by rain, for example close to the door.
• The installation strength will depend on the vehicle model and the installation position.
Choose a position where the main unit can be firmly installed, and install it securely.
If the main unit is not securely fastened, the errors in location display will be greater.
• Do not install the main unit on the board covering the spare tyre or other places which
are subject to vibration.
• When the main unit is installed under a front seat, ensure that it does not obstruct the
sliding action of the seat.
• Do not install the main unit where it will be under luggage. Strong mechanical shock to
the main unit would increase the errors in location display.
• Avoid installing the main unit in places where it will interfere with loading and unload
ing of the spare tyre, jack, tools, etc.
• Check that a CD-ROM can be ejected with the main unit installed.
• Install the main unit on a surface with
in 10° tolerance. A surface tilted more
than this would increase the errors in
location display.
If you use the mobile navigation system out of areas where PIONEER is permitted, your
position is not shown properly.
Do not install the main unit vertically.
Installing it this way can cause it to
function improperly.
Ideally, when the main unit is being mounted under the rear shelf, two persons should
work together. One person should hold the main unit, and the other should tighten the
hex-nuts. If you do this job on your own, take great care not to drop or knock the main
unit.
When suspending the main unit under the rear shelf, be sure that it is firmly installed on
a solid surface. If the unit is not firmly installed, increase the errors in location display.
<1