1 repeat keys, 2 inserting and moving paper, 3 viewing mode – Brother AX-325 User Manual
Page 2: 4 margins
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special note: In this Guide, the "+" sign between two keys, tike ^ + J means that
you press ]$! and hold it down while pressing J .
1 Repeat Keys
The following keys will auiomatically repeat when held down.
All Character key
[-] {hyphen) '
[SPACE BAR]
+ 5
1^+5
IH
_
(carrier moves from one tab to the next)
2 Inserting and Moving Paper
To insert paper:
insert a sheet of paper and press ^ -4-
. Paper will
advance to approximately one inch from the top edge of the paper. Press
g-J to position the carrier on the left margin.
To move
paper: Press ^ to raise the paper by 1/12 inch. Press
]$i + J to lower the paper by i /12 inch.
To move the paper continuously in either direction, hold down the appro
priate key(s) for more than half a second.
If you raise/lower the paper more than 1/12 inch, the correction memory is
cleared.
D
3 Viewing Mode
Press +
[VIEW]
to turn the viewing mode on or off.
(CD—'
.
—
^ \
+
V._____>
- J
Viewing Mode OFF
During continuous typing and during viewing, the paper remains at the
typing position.
4 Margins
Move the carrier to me desired position for the new left or right rr.argin
using g-j or
[SPACE] .
To move beyond the position of a current margin, first position the carrier
on the margin and press
[ALT] +
.
When the carrier is on the desired position, press
[ALT]
+ (if you are
setting the left margin), or
[ALT]
+ ]-g (if you are setting the right margin).
The minimum distance between the left and right margins is two (2)
inches, i.e. either 20 characters (Pica pitch), 24 characters (Elite pitch). -
CD
CD
□
□
I—10
-Page 2-