Honeywell MAGIC STAT CT3100 - Manual (Page 6)

A Program Press and release. The display shows PRO-
^
GRAM with the time 12:00 AM.
Enter Your First Program
Enter a Program Point
I Time
Heat
Press until the time you want the temperature
change to occur is displayed; hold the button
down to move time ahead; tap to move back
(6:00 AM shown in example).
Press until the desired heating temperature for
that time is reached; hold the button down to
raise the temperature; tap to lower it (70° F
shown).
As you program, you will notice the dots under the temperature
scale, which appear or disappear to correspond to the settings
vou are making.
8
# run ^
iu:uiui
®®®®®©®
Od
Ojf
®®®®®©®
Cool Press until the desired cooling temperature for
that time is reached; hold the button down to
lower the temperature; tap to raise it (76° F
shown).
After the first setting is made, the display shows that 7 days a
week, starting at
6:00
AM, the thermostat will turn on the heat
when the temperature drops below 70° F (when the system
switch is set to HEAT), or turn on the air conditioning when the
temperature rises above 76° F (when the system switch is set
to COOL).
To enter the rest of your programs for the first day, repeat the
steps under “Enter a Program Point” (page
8
), until up to
6
changes have been entered.
C nn A«
Lf.'ULf
®@®®®©®
69
-
8023—2