Caps and shift keys - © + 0 and, Delete key, Code key – Brother P-Touch PT-110 User Manual
Page 3: Cursor keys - 0 and, Space key, Feed key, 1) insert batteries, 2} insert tape cassette, 3) press the © key, 4) type in and format your text
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Function keys
To conserve battery power, the P-Touch automatically
switches itself off if no key is pressed for five minutes.
When the batteries are low, ^'BATT" appears on the dis
play when you try to print or toTeed the tape. If the bat
teries are very low, the P-Touch will switch itself off.
If the P-Touch is switched off and on again, the current
message, text style, text size setting, framing setting and
label length are retained.
•) CAPS and SHIFT keys - © + 0 and ©
CAPS
To use all capitals, hold down and press 0; a small
triangle appears above CAPS on the display. From now
on, each letter typed will be upper case^ To revert to
lower case, hold down and press 0 again; the trian
gle disappears.
To enter a single capital letter (or a character on the top
half of a key), hold down ^ and press the letter's key.
•) DELETE key - ©
TOP
FIELOC,
Use 0 or 0 to move the cursor under the letter to the
right of the one you want to delete, then press ©.
•) CODE key - ©
Use 0 to access the functions printed in blue above the
keys (e.g. STYLE).
For example, to select the character style for your mes
sage, hold down
0 and pressing
is displayed.
and press Keep holding down
until the name of your desired style
•) Cursor keys - 0 and ©
As you press each key, a character appears on the dis
play. The horizontal bar cursor indicates where the next
letter typed will appear. Move the cursor back and forth
using 0 and Q. The message moves on the display as
you scroll through it. If you try to scroll past the start or
end of the message, the error message "ERR" appears. To
move straight to the start or end of the message, hold
^
TOP
RELOa
^
down 0 and press 0 or ,Q .
©
CLEAR
+ 0
To delete the current message, hold down 0 and press
•) SPACE key
Use to separate words in your message.
FEED
•) FEED key - © + ©
Flold down 0 and press 0 to feed the tape out
approx. 20 rrun at a time.
Do not press the tape cutter lever while the P-Touch is feeding
the tape, as this will cause the tape to jam.
©
INSERT
+ ©
INSERT
WSEflT
Hold down ,0, press Q and press Q again to toggle
between Insert and Overwrite modes. In Insert mode
new characters are added into the message above the
cursor. In Overwrite mode a typed letter replaces the let
ter above the cursor.
When you select Insert mode, the indicator ( ▼ ) below'
INS. appears.
When you select Overwrite mode, the indicator ( ▼ )
goes off.
Steps to make a label
1) Insert batteries.
2} Insert tape cassette.
3) Press the © key.
4) Type in and format your text.
Your message can be up to 55 characters long including
spaces. See the Advanced functions section for a descrip
tion of how to format your text.
5) Press the key.
6) Cut the tape off.
7) Peel off the backing.
Advanced functions
SIZE
•) Change letter size - © + ©
The four available text sizes are: regular ( A ), double
width (A), double height { ^ ) and double width and
height ). A small triangle on the message display
points to the currently selected type size:
A , A
, j[ or
^ . Hold down 0 and keep pressing
q
until the tri
angle points to the size you want, then release the 0
key