Wire and mount thermostat – Honeywell CT52A User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

□

For CT5QA'.
Connect each wire from the wall

to either terminal on the back of the
thermostat. Tighten the screws.

□

For CT51A, CT52A;

Connect wires from the wail to

matching terminals on back of thermo
stat. Tighten the screws.

□

For GT53A:

Connect vi/ires to R and W for

7S0 mV systems. Connect to R and Y
for 250 or 500 mV systems. Tighten the
screws.

□

Push excess wire back into wait
and plug hole with nonilammable
insulation to prevent drafts from affecting
thermostat operation.

□

Place a bubble level or plumb line against the ther

mostat to find the level position. Start a screw in

the center of the bottom mounting hole. Move the temper
ature setting lever if necessary to uncover the niounting

hole.

WIRE AND

MOUNT

THERMOSTAT