Operating your food processor, Preparing to use your food processor – Kenmore 100.90002 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARING TO USE YOUR
FOOD PROCESSOR
Before using Ifia food proosssof, wash all parls except the Base tn hot, soapy wafer.
Rinse dry. These parts can also be placed in the dishwasher on the lop rack. Do rrot
put in or osar the wtensil tsaskei.
PI CAUTION
: CAUTION: Blades are sharp. Hantlls carefully
H
13
CAUTION:
NEVER place food
or other liquids.
processor’s motor/basa If» water
MOTE: DO MOT attempt to chop ice in this Food Processor; it will damaf e the
Bowl and dull the Chopping Blade,This «nil will not whip cream, beat egg
whites to a deslreble volume, grind coffee beans, spices or other Hems with
high oil content, or slice or shred hard-cooked eggs, marshmallows,
or soft cheeses.
IMPORTANT: For your protection, this unit has an inlerlock syslam.
The Processor will not operate unless the Bowl Is properly locked onto
Base and Cover is properly locked onto the Bowl. Do not attempt to operate
the unit without the Bowl, Bowl Lid, and Food Chute Lid correctly in place.
OPERATING YOUR FOOD PROCESSOR
ASSEMBLY
1 Make EUfe the Contfo! Knob Switch is in the OFF position and the power cord
is unplugged „
2 Be sure Food Processor base is on a flat, dry, clean, stable surface before you
begin processing,
3 To asaemble, put the Bowl on the Base by aligning the Bowl handis with the unlock icon
on the base Turn the Bowl counterclockwise untii it ciicks into place (see Fig 2 and 2a).
The Bowl handle should rrow lace straight to the cerster front,
NOTE: There is only one position for the Bowl to lock orito the Base The uni! wilt no! operate
if the Bowl does not lock onto the Base,