Pioneer PD-F706 - Manual (Page 5)

CONNECTIONS
Before making or changing the connections, switch off the power
switch and disconnect the power cord from the AC outlet.
Stereo amplifier CD player
©Making connections
[U Connect the OUTPUT jacks of this unit to the input jacks (CD or
AUX) of the amplifier. Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
• Be sure not to connect this unit to the amplifier's PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
E Connect the power cord to a household AC wall outlet.
• Make sure plugs are inserted fully into the wall outlet.
NOTE:
Do not connect the power cord to an AC outlet on your amplifier.
©Connecting the OPTICAL FIBER CABLE
This unit can be connected to an amplifier equipped with an optical
digital jack.
1. Remove the protective dust cap from this unit's DIGITAL OUT
OPTICAL jack
2. Use an optical fiber cable to connect the DIGITAL OUT OPTICAL
jack of this unit to the optical input jack of the amplifier.
• Align the plug of the optical fiber cable with the optical digital jack
and fully insert the plug to make a secure connection.
Use a separately sold optical fiber cable for the optical digital jack
connections.
© CD*Deck synchro function
If you have a Pioneer cassette deck provided with the CD*Deck
synchro function, connect the CD*DECK SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro recording
can be carried out between the player and deck.
• For details on connections and operation, refer to the operating
instructions supplied with the cassette deck.
• The CD'DECK SYNCHRO cable is not supplied with the CD
player.
• When CD»Deck synchro recording is carried out on several discs,
use the program playback function. (Refer to page 12 for details
of program playback.)
Precautions concerning use of optical fiber cables
• Fully insert the optical fiber cable plugs all the way into the jacks.
• Be careful not to fold or crimp the cable. When coiling an optical
fiber cable for storage, make sure the diameter of the coil is 15 cm
(6 in.) or larger.
• Use an optical fiber cable with a length of 3 m ( 10 ft.) or less.
• Protect the optical fiber cable plugs from scratches and dust.
• When the unit is not connected using an optical fiber cable, be sure
to keep the protective dust cap plugged into the optical digital
output jack at all times.
5
En