Pioneer PD-M550 - Manual (Page 16)

TO PLAY ONLY DESIRED TRACKS/DISCS (Program Playback and Delete Program Playback)
Delete program playback - To delete
undesiiled tracks/discs
1 DiidnA stop mode, press DELETE.
The t)E LETE indicator lights.
2 Press the Disc number button which contains the
track to be deleted.
To delate entire discs, enter the desired disc numbers with the
Disc number buttons and go to step 4.
• When [the Disc number button is pressed, "AL" (all tracks)
appears on the display.
3 Press or MH button so that the track No. to be
deleted appears on the display and press DELETE.
For PDkM550 only:
Instead of the NM or eet button, the TRACK NUMBER/Digit
button can be iised.
Enter the desired track No. with the TRACK NUMBER/Digit
button.! In this case, it is not necessary to press DELETE.
4 Repédt steps 2 and 3 for other tracks to be deleted.
5 Pre^ ►.
All trécks other than deleted tracks/discs are played in the order
of the disc and track numbers. When tracks have been played,
the player enters stop mode.
To stop Délete program playback:
Press
To enter track No. 11 or above with the Track number/Digit
buttons, see "Track Search" on page 11.
tracks to be deleted should be selected between track No. 1 and
track No
If the ma
not be erased even if thé power is turned off.
3 2 .
gazine is in the player, the Delete Program contents will
NOTE:
if the Progrem procedure has been performed, Delete programming
cannot be carried out.
To clear all of the delete program contents
jjEcT
PD-M550/PD,M455/PD-M453 only
"S' CLEAR
® During St
® When :th
cleared
© Press C
play mocjl'
playback
M550/P-
flop mode, press ■.
lb magazine is ejected, the program contents will be
tjEAR on the remote control unit during stop mode or
:e. When CLEAR is pressed during Delete Program
mode, the player enters normal playback mode. (PD-
iJ”M455/PD-M453 only)
16
En