beautypg.com

Air dry, When using air dry, Changing cycles after pressing start – Kenmore ELITE HE4 110.9586 User Manual

Page 19: End of cycle signal, Tume heated dryer rack

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Air Dry

Use the Air Dry Modifier for items that require drying without heat

such as rubber, plastic and heat-sensitive fabrics. This table
shows examples of items that can be dried using Air Dry.

Type of Load

Time*

(Minutes)

Foam rubber - pillows, padded bras, stuffed toys

2 0 - 3 0

Plastic - Shower curtains, tablecloths

2 0 - 3 0

Rubber-backed rugs

4 0 - 5 0

Olefin, polypropylene, sheer nylon

10-20

‘Reset cycle to complete drying, if needed.

When using Air Dry
■ Check to see that coverings are securely stitched.

■ Shake and fluff pillows by hand periodically during the cycle.

■ Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Air Dry is not available with Auto Dry Cycles.

You can change Auto Dry and Manual Cycles, Options and

Modifiers anytime before pressing Start.

■ Three short tones sound if an unavailable combination is

selected. The last selection will not be accepted.

Changing Cycles after pressing Start

1. Press PAUSE/CANCEL twice.

2. Select the desired cycle and options.

3. Press and hold START. The dryer starts at the beginning of

the new cycle.

NOTE: If you do not press Start within 5 minutes of selecting the

cycle, the dryer automatically shuts off.

Changing Options and Modifiers after pressing Start
You can change an Option or Modifier anytime before the
selected Option or Modifier begins.

1. Press PAUSE/CANCEL once.

2. Select the new Option and/or Modifiers.

3. Press and hold START to continue the cycle.

NOTE: If you happen to press Pause/Cancel twice, the program

clears and your dryer shuts down. Restart the selection process.

End of Cycle Signal

The End of Cycle Signal produces an audible sound when the

drying cycle is finished. Promptly removing clothes at the end of

the cycle reduces wrinkling.

HIGH

• Low

OFF

END of CYCLE SIGNAL

Press END of CYCLE SIGNAL to adjust the sound level or turn off

the signal.

NOTE: When WRINKLE GUARD® is selected and the End of
Cycle Signal is on, a tone sounds every 5 minutes until the
clothes are removed, or WRINKLE GUARD® ends.

TUME

Heated Dryer Rack

The dryer rack is shipped in place in your dryer. Remove and

discard any packing material before use.

Use the TUMBLE FREE'^“ Heated Dryer Rack for items that you
do not want to tumble dry, such as sweaters. When you use the
heated dryer rack, the heated air inside the dryer flows in a
concentrated pattern to allow efficient and uniform drying.

Use Timed Dry to select the desired time.

NOTE: Do not use Automatic cycles with the dryer rack.

To use the heated dryer rack:

Do not remove the lint screen.

1. Open dryer door.

2. Place dryer rack over the bottom of the dryer door opening.

Rest the back wire on the dryer back ledge. Push down on

the frame front to secure over lint screen.

3.

Place wet items on top of the rack. Allow space around items

for air to circulate. The rack does not move, but the drum will

rotate. Make sure items do not hang over the edges or
between rack grille.

4. Close the door.

19

This manual is related to the following products: