Kenmore ELITE HE4 110.9586 - Manual (Page 15)

DRYER USE
AWARNING
Ы/
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
fiammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
AWARNING
M
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (inciuding cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
WARNING: To reduce the risk of fire, eiectric shock, or injury to
persons, read the iMPORTANT SAFETY iNSTRUCTIONS before
operating this appiiance.
Foiiow these basic steps to start your dryer. Piease refer to
specific sections of this manuai for more detaiied information.
1. Clean lint screen before or after each cycle.
cycle time (in minutes) will show in the display.
To use an Auto Dry Cycle
■ Select an Auto Dry Cycle.
■ Select AUTO DRY LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
■ Select the desired Options.
To make changes during an Auto Dry Cycle:
■ Press PAUSE/CANCEL.
■ Adjust Auto Dry Level and/or Options.
NOTE: Auto Dry Level selections can only be made while
using Auto Dry Cycles. You can select a different dryness
level, depending on your load, by pressing Auto Dry Level
and choosing More or Less. Selecting More or Less
automatically adjusts the sensed time needed.
To use a Manual Cycle
■ Select a Manual Cycle.
■ Press MORE TIME or LESS TIME until the desired drying
time is displayed. Tap MORE TIME or LESS TIME and the
time will change by 1-minute intervals. Press and hold
MORE TIME or LESS TIME and the time will change by
5-minute intervals.
NOTE: The More Time and Less Time features can only
be used with Manual Cycles.
О
О
MORE TIME
LESS TIME
■ Press TEMPERATURE until the desired temperature
glows.
NOTE: During a Manual Cycle, you can change the settings
for Time, Temperature, WRINKLE GUARD® and End of Cycle
Signal. Press PAUSE/CANCEL twice to stop the dryer and
clear the settings. Select another cycle or option.
15