Warning, Caution, Vacuum cleaner storage – Kenmore 216.3701 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I IIZMIT S X I I I Ct CHXDI
a i
^
c r a b
I
m x
I jE5lePS™ES imCEÍ"^d»lwl 1CI» i
WARNING
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning
the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.
TODC|l/|fl\/C I II
h
MT PII II D
I vksuMflVI *Wir wf »HI* aHM» JH I Ibifll lyy nnHiliNV
1. Disconnect power cord from electrical outlet
2. Press handle release pedal and lay
vacuum cleaner back.
3. Remove the two
(2) screws from the
ens cover.
4. Insert flat blade of
screwdriver into slot
at top of the lens.
Lift the lens cover to
remove.
CAUTION
Do not use a bulb rated over 9W
{13V). During extended use^ heat
from the bulb could overheat
surrounding plastic parts.
5. Pull bulb out of
socket. Do NOT
twist Gently push
replacement bulb into
socket to replace.
6. Snap fens cover
back into place and
secure the headlight
lens by replacing the
two screws.
Note:
See separate
PARTS LIST
for bulb
number
VACUUM CLEANER STORAGE
Gather the cord and wrap it loosely around
the upper and lower cord hooks. Lock
power cord plug onto the power cord.
Store the vacuum
cleaner in a dry,
indoor area, on the
floor with the handle
locked in the upright
position.
WARNING
Electrical Shock and Personal
Injury Hazard
Wrapping the cord too tightly
puts stress on the cord and can
cause cord damage.
14