Foam filter care, Warning, Exhaust filter removal and replacement – Kenmore 216.3701 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FOAM FILTER CARE

Remove foam filter

from dirt container.

Hold filter under
running water to

wash. Ring excess
water out of filter.
Allow filter to dry for

at least 24 hours.

Return filter to dirt
container by placing
on top of screen
inside dirt container.

IMPORTANT: Do not return filter
to the dirt container before it has
completely dried.

EXHAUST FILTER REMOVAL AND REPLACEMENT

WARNING

Electrical Shock and Personal
Injury Hazard

Disconnect electrical supply
before servicing or cleaning

the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.

Note:

For best performance, replace the

exhaust filter a minimum of every 6 months.

Grasp tab on exhaust filter cover and
pivot forward to remove.

Remove exhaust filter from deaner. Tap

filter on inside of garbage can to remove

excess dust and dirt from filter.

Return exhaust filter to cleaner. Replace
exhaust filter cover by inserting the tab
on the cover Into the slot on the cleaner.
Pivot toward deaner until cover snaps
into place.

This manual is related to the following products:

216.31701