Kenmore ELITE 790.3105 - Manual (Page 20)

Setting Oven Controls
Cakes Breads
The Cakes Breads functions are designed to give optimum
baking performance for Cakes or Breads. These functions
work well for baking cakes, brownies, pies (fresh or frozen),
baked custards, cheesecakes, breads, rolls, biscuits, muffins
and cornbread.
The Cakes function provides a preheat with a gentle cycling
of heat giving cakes more volume and allowing delicate
foods to cook more evenly.
The Breads function adds a special preheat feature to the
bake cycle that thoroughly heats the oven from top to
bottom to give more evenly browned foods.
See the example below to set Cakes or Breads.
1. Arrange oven racks when cool. If needed preheat oven
as desired and place food in oven.
2. For Cakes, press the CAKES BREADS keypad until
CAKES appears in the oven display.
For Breads, press the CAKES BREADS keypad until
BREADS appears in the oven display.
If needed, use numeric keypads to enter a different oven
temperature.
3. Press START.
NOTE
You may press STOP any time when setting the control or
during the cooking process.
For best results
• Dark or dull pans absorb more heat than shiny bakeware
resulting in dark or overbrowning of foods. It may be
necessary to reduce the oven temperature or cook time
to prevent overbrowning of some foods. Dark pans are
recommended for pies. Shiny pans are recommended for
cakes, cookies or muffins.
• Breads will have better results baking on a single oven
rack.
• When baking layer cakes or cookies using 2 oven racks,
place cookware on rack in position 2 and 4. For best
results when baking cakes or cookies using a single oven
rack, place rack in position 2 or 3.
Warm & Hold™
The Warm & Hold feature will keep oven baked foods warm
for serving up to 3 hours after cooking has finished. After 3
hours the Warm & Hold feature will shut-off automatically.
The Warm & Hold should only be used with foods that are
already at serving temperature. The Warm & Hold feature
will maintain an oven temperature of 170°F (77°C).
The Warm & Hold feature may be used without any other
cooking operations or may be used after cooking has
finished using Cook Time or Delay Start.
See example below to set Warm & Hold for the oven to
start immediately.
1. Press WARM & HOLD
2. Press START
See example below to set Warm & Hold to start after a
Cook Time or Delay Start.
1. Press BAKE or any other cooking function.
If needed, enter a different temperature.
2. Press START.
3. Press BAKE TIME.
4. Enter time.
5. Press START.
If needed, set a DELAY START feature.
6 . Press WARM & HOLD.
7. Press START
NOTE
You may press STOP any time when setting the control or
during the cooking process.
20