Kenmore PLASMAWAVE 85450 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING
Before Toy Call
Solutions to Common Problems
Before you call for service, review the list below, This list covers problems that are not the
result of defective materials or workmanship.
OCCURRENCE
POSSIBLE CAUSE/SOLUTION
The remote control
does not work.
»Make sure the remote control battery is inserted correctly.
• Replace a worn-out battery.
“ Make sure that the remote control has a clear line of sight to
the air cleaner.
The unit has stopped
removing odors
effectively, or seems
to be emitting an odor.
" Make sure the AIR QUALITY sensor is not blocked or
clogged.
• Move the unit closer to the offending odors.
• Replace the filtere as they may have reached their
capacity to absotb pollutants. You may need to replace filters
more frequently.
The AIR QUALITY
LEVEL indicator is
orange or red, but the
air seems clean.
Clear the AIR QUALITY sensor with a vacuum cleaner as it
may be blocked or clogged.
Unit interferes with
radio or television
reception.
Because this unit radiates radio frequency energy, try one or
more of the following suggestions:
" Reorient or relocate the receiving antenna.
" Increase the distance between the equipment and the air
cleaner,
• Connect the air cleaner to an outlet on a circuit different from
that to which the equipment is connected.
« Consult an experienced television/radio technician.
The CHECK FILTER
Indicator remains lit
after replacing the
True HEPA Filler.
Press the RESET FILTER button by gently inserting a paper
clip into the RESET FILTER button hole. Hold for 3-5 seconds
until a "beep” sounds to indicate the unit has been reset.
13