Kenmore ULTRA WASH 15838 - Manual (Page 14)

Cycles
Ultra Wash Sensor • QuietGuard System
WATER HEATING CONTROL LOCK
1:
• • • • • • •
POTS
PANS NORMAL
WASH
WATER
MISER
CHINA
WASH QUICK 1
RINSE 1
I WATER
1 HEAT
N
NO HEAT
DRY
y
SENSING CYCLES OPTIONS
[CANCEU
I
DRAIN
I
CYCLE
A V” shows what each cycle includes.
Soil Level
Detected By
Ultra Wash
Sensor WashRinse
Main
Wash Rinse
Final
Heated
Rinse Dry
Cycle
Timett
(min.)
Water
Usage
(gallons/
liters)
Heavy
/ /t /t / /t ✓
96t+ 10.8/40.9
Light
/1 ✓ /t y
80tt 8.6/32.6
Detergent
Dispenser
Sections
POTS & PANS
POTS
PANS
Use Both
Sections
For cleaning dishes, and pots and pans with cooked-on or baked-on foods.
NORMAL WASH
NORMAL
WASH
Heavy / /+ / /1 / 90tt 10.8/40.9
Medium / /+ / /t / 86tt 8.6/32.6
Light / / /1 y 70»^ 6.5/24.6
Use Both
Sections
For everyday heavily soiled dishes. (The Energy Guide label is based on this cycle.)
•Select the Water Heat option to heat water to 135°F (57°C) in the main wash.
WATER MISER
WATER
MISER
Heavy y yt yt y 70tt 6.5/24.6
Light y yt y 60tt 4.3/16.3
B
Use
Covered
Section
For prerinsed and lightly soiled dishes. Saves energy by using less hot water than Normal Wash cycle.
•Select the Water Heat option to heat water to 135°F (57°C) in the main wash.
’ Water automaticalty heats to 135°F (57°C).
tt Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the
longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
The electronic time display pauses while water is being heated and Water Heating status indicator glows while water is being heated to the
temperature shown.
NOTE: You can add a dirty dish if the Washing status indicator is on. Opening the door will not affect the sensor.
1 3