Kenmore 116.31912 - Manual (Page 9)

Swive/-^^
The attached
hose swivels to
make cleaning
easier in every
direction.
Remove the
hose from the
hose clip by
pulling straight
out.
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME MODELS
■ rlUllU
Crwice
Tool
TslBscoping
Wand
Remove the
telescoping
wand from
its storage
position.
Remove the crevice too! from its storage
position in the wand. Turn the locking ring to
the UNLOCK position.
Extend the wand to its full length. Turn the
locking ring to the LOCK position. Attach the
extension wand onto the open end of the
hose.
Lower
Wand
SucOon
Control Slide
Align the tabs on the extension wand with
the “J” slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum reach
with the attachments, add the
crevice tool to the end of the
wand by inserting and
twisting slightly.
SueOon
Control
Slides
Telescoping
Wand. '
Crevice,
Tool
When using the dusting brush or the com-(
bination brush, they may be attached
directly to the wand or placed on the end of
the crevice tool.
Dusting Brush
(Some Models)
I— Comblnmtlan
Brush (Soma
ModMs)
Crevlca Tool
Wand
U
Brush
TO OPERATE SUCTION CON­
TROL SLIDE
Telescoping Wand
When using attachments for cleaning
draperies, small rugs with tow pile and other
delicate items, twist the suction control slide
to the open position. This lever is located on
the telescoping wand, close to the hose.
This will reduce suction for ease of cleaning.
Note: Return
suction control
slide to the closed
position for
normal cleaning.
Suction
Control
Slide
A
CAUTION
When using attachments, be careful not
to overextend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
cleaner to tip over.