Kenmore 116.31912 - Manual (Page 8)

AGITATOR ON/Oñ= SELECTOR
OFF Position: Step on the back half of the
pedal to turn off the agitator for use on bare
floors.
tn the OFF position, the agitator does not
rotate. This setting should be used for
cleaning hardwood and tile floors.
Note: The light will remain on when vacu­
uming with the agitator in the OFF Position,
provided the vacuum is not fully upright.
ON Position: Step on the front half of the
pedal to turn on the agitator for use on car­
peting.
In the ON position, the agitator will turn.
When carpets are being cleaned the selec­
tor should be in this position.
Attention: Refer to your carpet manufactur­
ers cleaning recommendations. Some more
delicate carpets may require that they be
vacuumed with the agitator turned off, to
prevent carpet damage.
A
WARNING
Personal Injury Hazard
DO NOT place hands or feet under­
neath the unit when changing tiie
Agitator On/Off Selector to the On
position. The agitator begins to
revolve rapidly.
ATTACHMENTS
Cre Wee
Tool
Telescoping
Wand
Dusting
Brush
Combination
Brush
Stretch
Hose
Hose
Collar
Identify each of the attachments shown
above.
TO USE ATTACHMENTS:
Remove the lower end of the stretch hose
from the cleaner by grasping the hose col­
lar, twisting and pulling straight out The
attachments can now be added to the hose.
Note: The agitator will not rotate if the hose
has been removed from the nozzle.
NOTE: The motor protector may open when
using attachments or when cleaning new
carpet, due to reduced airflow by the attach­
ments themselves or by new carpet fuzz fill­
ing the bag quickly. See the
TROUBLESHOOTING section.
A
WARNING
Efectrical Shock And Personal Injury
Hazard
Disconnect electrical supply before
servicing or cle£mfng the unit. Failure
to do so could result in electrical shock
or personal injury from cleaner sud­
denly starting.