Kenmore 141.168600 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing Ice Bucket and Insulation Bucket (Cooler
Body Assembly) to left Side Shelf

1. Place the stainless steel Ice Bucket into the left

Side Shelf.

2. From underneath the left side shelf, install the

Insulation Bucket to the bottom of Ice Bucket. See
Fig 9d.

3. Install the Strainer Body through the hole on the

bottom of the Cooler Body Assembly. Fix firmly
from below using the rubber washer and Shank Nut.

4. Snap the cap to the end of Strainer Body.

. Place the stopper into the Strainer Body.

Figure 9d

STOPPER

STRAINER BODY

ICE BUCKET