To remove the drawer, To replace the drawer, Care & cleaning – Kenmore ELITE 790.4107 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Remove the Drawer:
1.
Open the drawer to the fully opened position.
2.
Locate glide lever on each side of drawer, pull up on the
left glide lever and push down on the right glide lever (See
Figure 1).
3.
Pull the drawer away from the range.
To Replace the Drawer:
1.
Pull the plastic slider to the front of the glide slots on
each side of the drawer cavity (See Figure 2).
2.
Align the glide on each side of the drawer with the
drawer cavity glide slot.
3.
Push the drawer into the drawer cavity until glide levers
“click” (approximately 2”). If you do not hear the glide
levers “click” or the drawer does not feel seated
remove the drawer and repeat steps 1 thru 3.
Care & Cleaning
Removing and Replacing the Drawer
Figure 2
35