Kenmore 790.9602 - Manual (Page 11)

Oven Contro! Functions
READTHEINSTRUCTIONSCAREFULLYBEFOREUSINGTHEOVEN.Forsatisfactoiyuseofyouroven.becomefamiliarwith
the various pad functions of the oven as described below.
CLOCKSET
PAD— Used
to set the
time of day.
TIMER SET/OFF
PAD— Used to set
or cancel the minute
timer. The minute
timer does not start
or stop cooking.
Also.
TIMER SET/OFF pad
is used to set the
Continuous Bake
feature.
COOK TIME
PAD— Used to
enter the length ot
the baking time.
UP and DOWN ARROW PADS— Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, clean time and minute timer. BAKE PAD—Used
to select the bake
function.
•
©
\
•
Gm%k
Tmis
88.B8 1
V
lake
•
• m • Oi?eo •
Isrsief
s>yim
Delay
Stari
# Freht'Sf; srm Sek'et
t'mm
DELAY START PAD— Used
to set the desired start time
for baking & Self-Clean. May
be used with COOK TIME to
program a delayed bake
cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS*—The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self­
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks.
FEATUREINDICATOR
LIGHTS— These light to
show which feature is in
use.
BROIL PAD— Used to
select the variable broil
function.
SELECTSELF-CLEAN
PAD— Used to select the
Self-Cleaning cycle. A 2,
3 or 4 hour Self-Clean
time may be selected.
STOP/CLEAR PAD—
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate oven
door lockout setting.
ill
■Mfeip
o
*Note: The OVEN indicatorlightontheejectronicdisplay will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to rnaintain the selected bakiri.g temperature. When the
preheat indicator light turns OFF, your oven is ready. .................... ... ....... ... ... ... ... ... ... ... ... ... ... ... ... ....... ... ... ... ... ... ... ... ... ... ... ... ... ....... ...
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold (5^. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press and hold (^ ) again for 7 seconds until the control beeps
once.
Note: The control will return to the audible mode attera power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
tor any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (contro! should not be in a Bake or Clean mode):
1. Press “ . "------------- " appears in the display.
2. Press and hold the W until "FH" appears in the display.
3. Press and hold until “F or °C appears in the display.
4. Press the j\
or 'V" to change °F to °C or “C to °F.
5. Press any control pad to return to normal operating mode.
11