Section 2, D. typical threaded in and out pipes to softener, Deluxe valve models – Kenmore Water System User Manual

Page 11: Outside, Faucets, Fittings required not identified, 90* elbow (2) union (2) pipe (as reg.), Valve, Plan your installation, Outlet 1 " x 3/4" reducer' valve

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

:^.

:”

SECTION 2

:^.

PLAN YOUR INSTALLATION

D. TYPICAL THREADED IN AND OUT PIPES TO SOFTENER

FIG. 5

If you are planning a threaded plumbing installation, with a 3-valve bypass, use the
drawing in Fig. 4 as a guide. Use union fittings, as needed, to connect the plumbing.

DELUXE VALVE MODELS

OUT

Outside
Faucets

FITTINGS

REQUIRED NOT

IDENTIFIED

90* Elbow (2)

Union (2)
Pipe (as reg.)

SOFTENER

NOTE:
It may be easier to slip the pressure fit ground

clamps onto the plumbing prior to making all
connections permanent. See page3-8.

Outlet

1 " X 3/4" reducer'

VALVE

*NOTE:

For 1 in. plumbing connection,

usea1 in. threaded straight connec

tor.

2-5 Deluxe Valve

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line