Oven vent location, Arranging oven racks, Removing & replacing oven racks – Kenmore 790.72114 User Manual
Page 8: To set the clock, Before setting oven controls, Setting clock & minute timer
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Setting Oven Controls
Oven Vent Location
The oven vent is located below the backguard. When the oven is on,
warm air is released through this vent. This venting is necessary for
proper air circulation in the oven and good baking results. DO NOT
BLOCK THE OVEN VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL
(PRIOR TO OPERATING THE OVEN). Always use oven mitts when
using the oven.
Removing & Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up front of rack and
slide out. To replace, fit the rack onto the guides on the oven walls. Tilt
the front of the rack upward and slide the rack back into place.
Arranging Oven Racks with 6 Rack Positions
To bake on a single rack, place the rack on position 3 or 4. To bake on
2 racks, place the racks on positions 3 and 5.
RECOMMENDED RACK POSITIONS FOR
BROILING, BAKING & ROASTING
Food
Rack Position
Broiling meats, chicken or fish
1 or 2
Cookies, cakes, pies, biscuits &
muffins
3 o r 4
Frozen pies, angel food cake, yeast, bread,
casseroles,
small cuts of meat or poultry
5
Turkey, roast or ham
6
Note: Always
use caution
when removing food
from the
lower rack
positions.
Setting Clock & Minute Timer
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display
window.
1. Push [eiacKj.
2. Push in and hold or until the correct time appears in the display, /s. Advances time, reverses time.