Setting oven controls, Consumer defined control features, Instructions – Kenmore 790.75603 User Manual

Page 18: Press, For 7seconds, Display, Before setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Oven Controls

Consumer Defined Control Features

Setting Temperature Display — Fahrenheit or Celsius

The BROIL

™! and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The

oven control can be programmed to display temperatures in Fahrenheit or Ceisius. The oven has been preset at the
factory to display in Fahrenheit.

INSTRUCTIONS

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1. To tell if the display is set for Fahrenheit or Ceisius press ( Brail)

(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"

appears, the display is set to show temperatures in Fahrenheit

(Figure 2). If "C" appears, the display is set to show

temperatures in Celsius (Figure 3).

Pt"®ss to switch between Fahrenheit or Ceisius display

modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).

PRESS

{ Broiiy

for 7seconds

DISPLAY

(on ccn

h J U D J U

Figure 1

Figure 2

3. Press START to accept the change or press (^

stop

J to reject the

change.

START or (STOP

Figure 3