Kenmore 565.66101690 - Manual (Page 7)

INSTALLATION
Remove all packing material and accessories.
Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
1. Select a level surface that provides enough
open space (see illustration at right) for the
inlet and/or outlet vents.
• Leave a minimum clearance of 3 inches
(7.5 cm) above the oven.
• Do not remove the legs from the bottom of the
oven.
• Blocking the inlet and/or outlet openings can
damage the oven.
• Do not install oven over a range, cooktop or
other heat-producing appliance.
2. Plug your oven into a standard 120-volt / 60-Hz
household outlet. Be sure the electrical circuit
is at least 15 amperes and that your microwave
oven is the only appliance on the circuit.
To install the oven under the cabinet, optional
mounting kit. Stock No. 20-84339 (White) or
20-66900 (Black) is available.
Contact your Sears store.
On installation of mounting kit, 1 inch (2.5 cm)
must be allowed on both sides of oven and
4 inches (10 cm) must be allowed under bottom of
oven.
A minimum clearance of 3 inches (7.5 cm)
is required between the oven and any
adjacent wall. One side must be open.
NOTE;
This unit is not designed for 50 Hz or any
circuit other than a 120-volt/60-Hz AC circuit.
This oven is designed for countertop or
under-cabinet installation. Insertion into a
cabinet or wall will damage the product and
void the warranty.
I