Self-cleaning, Instructions, When the self-clean cycle is done – Kenmore 790.7937 User Manual
Page 34: Stopping or interrupting a self-cleaning cycle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Self-Cleaning
•
Setting Flex Clean
•
Setting Delay Flex Clean
INSTRUCTIONS
When the Self-Clean cycle is done:
1. The time of day,
"DOOR LOCKED"
and
"CLEAN"
icon will
remain in the display.
2. Once the oven has cooled down for approximately 1 HOUR, and
the
"DOOR LOCKED"
icon is no longer displayed, the oven
doorcan then be opened.
PRESS
DISPLAY
Stopping or Interrupting a Self-Cleaning cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. Press (^.
2. Once the oven has cooled down for approximately 1 HOUR and
the
"DOOR LOCKED"
icon is no longer displayed,the oven door
can then be opened (Fig. 7).
■
■30
Fig.7
IMPORTANT NOTES
when using the Self-Cleaning feature:
1. A Self-Cleaning cycle cannot be started if the
Oven Lockout
feature is active.
2. If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may not have thoroughly
cleaned. Once power is restored, set for another Self-Cleaning cycle to finish.
3. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12
hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 17 for instructions to set the control for
the
24 hour time of day
display mode.
34