Setting oven lockout feature, Instructions press display, To activate the oven lockout feature – Kenmore 790.7937 User Manual
Page 19: To reactivate normal oven operation, Instructions press, I'30, Setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•
Oven Lockout
•
Temperature Display
Setting Oven Controls
O
ven
L
ockout
Setting Oven Lockout Feature
The (^) pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door, prevents the
Warmer Drawer and most oven controls from being turned ON. It does not disable the clock, Kitchen Timer or the interior
oven lights.
INSTRUCTIONS
PRESS
DISPLAY
To activate the Oven Lockout feature:
1. Press and hold (^) for 3 seconds (Fig, 1),
2. After 3 seconds a beep will sound,
LOG
will appear and
"DOOR
LOCKED"
will flash in the display. Once the oven door is locked
the
"DOOR LOCKED"
indicator will stop flashing.
To reactivate normal oven operation:
1. Press and hold (s) for 3 seconds. A beep will sound.
LOC
will
clear. The
"DOOR LOCKED"
will continue to flash until the oven
door has completely unlocked (See Fig. 2).
2. Theoven isagainfullyoperational.
(
t
E-) for 3 seconds
(S) for 3 seconds
I'30
ion
l O U
LOC
Fig.l
Fig. 2
DISPLAY
Setting Temperature Display — Fahrenheit or Celsius
The
BROIL
and
FLEX CLEAN
pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
PRESS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius press
(
broi
^ (B
r
^ for 7seconds
(Fig. 3) and hold for 7 seconds;
"550°"
will first appear in the
display and then a beep will sound. If
"F"
appears, the display
is set to show temperatures in Fahrenheit (Fig. 4). If
"C"
appears, the display is set to show temperatures in Celsius
(Fig. 5).
2. Press
to switch between Fahrenheit or Celsius display
modes. The display will show either
"F"
(Fig. 4) or
"C"
(Fig. 5).
3. Press to accept the change or press (s) to reject the
change.
I‘30 550
Fig.3
19