Setting oven controls, Setting the warm & hold™ feature, Instructions press – Kenmore 790.9659 User Manual

Page 33: To set warm & hold, To set warm & hold to turn on automatically

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Oven Controls

•

Setting the Sabbath Day Feature (cont’d)

•

Setting the Warm & Hold™ Feature

It is recommended that any oven temperature change with the Sabbath feature activated be followed with 2 presses of the

START pad. This will insure the oven remains ON even if the attempt to set the oven temperature was lower or higher than
the oven control can accept. If the oven temperature is set incorrectly, the oven temperature will default to 170°F or 550“F.
Try to set the desired oven temperature again.

Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not turn
back on automatically. The oven will remember that it is set for the Sabbath and the food may be safely removed from the
oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath/Holidays. After

the Sabbath observance turn OFF the Sabbath feature. At the same time press and hold both the

and pads

for at least 3 seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further
assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at

http:\\www.star-k.org.

Setting the Warm & Hold™ Feature

The pad turns ON the Warm & Hold feature and will maintain an oven temperature of 170° F. The Warm & Hold

feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm &

Hold feature will shut the oven OFF automatically. The Warm & Hold feature may be used without any other cooking

operations or may be used after cooking has finished using Cook Time or Delay Start.

INSTRUCTIONS

PRESS

To set

Warm

& Hold:

1. Arrange interior oven racks and place baked food in oven. If the food is already in the

oven go to step 2.

Press

The Warm & Hold indicator light will flash.

Note: If no further pads are touched within 25 seconds the request to turn ON Warm &
Hold will be cleared.

3. Press

The Warm & Hold indicator light will glow steady indicating Warm &

Hold is ON.

4. To turn the Warm & Hold OFF at any time press The Warm & Hold indicator

light will turn OFF. Note: The Warm & Hold feature will automatically turn OFF after 3
hours.

To set Warm & Hold to turn ON automatically:

1. Arrange interioroven racks and place food in oven. Set the oven properly for Cook Time

or Delay Start.

2. Press

The Warm & Hold indicator light will flash.

Note: If no further pads are touched within 25 seconds the request to turn ON Warm &
Hold will be cleared.

Press

(smp.

The Warm & Hold indicator light will glow steady indicating Warm &

Hold is set to turn ON automatically after Cook Time or Delay Start has finished.

To turn the Warm & Hold OFF at any time press The Warm & Hold indicator

light will turn OFF. Note: The Warm & Hold feature will automatically turn OFF after 3

rii

7 ■

hours.

Pressing (s^ at any time will stop all oven baking operations.