Mrning, Handle assembly, Caution – Kenmore ASPIRADORA 116.34728 User Manual
Page 5: Cord assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
Please pay special attention to these hazard alert boxes, and follow any instructions
given. WARNING statements alert you to such dangers as fire, electric shock, burns
and personal injury. CAUTION statements alert you to such dangers as personal
injury and/or property damage.
' i V.V .Ù C C.-J i
Ì b i j î ,
A
mRNING
Electrical Shock Hazard
Do not plug into the electrical sup*
ply until the assembly is complete.
Failure to do so could result in elec*
trical shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate Repair Parts List. Use this
list to verify that you have received all the
components of your new Kenmore vacu
um cleaner.
Remove tape from dust bin release handle.
HANDLE ASSEMBLY
Remove the two (2) handle screws located
in the body.
Handta
Screw
Handle
Handle
Screw
Tape
Note: Do Not
Remove Tape
Body
Position the handle as shown in the illustra
tion below.
When installing the handle, firmly press the
handle onto the body Secure with handle
screws provided.
A
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum
cleaner without the screws in
place.
CORD ASSEMBLY
Make sure the quick release upper cord
hook is in the upright position. Remove
the wire tie from the power cord.
Lock the power cord
into the locking
notch base by
pressing it into the
quick release upper
cord hook as shown.
This helps keep the
power cord out from
under the vacuum
cleaner agitator.
Wrap the power cord around the upper and
lower cord hooks and lock the power cord
plug onto the power cord.