4G Systems XSJack T3e - Manual (Page 15)

15
Unsuccessful transmission confirmations will be printed in any case.
Fax reception
In the first stage of fax reception the XSJackT3 receives the fax from
remote into the internal memory, which is indicated by the red status
LED. Afterwards the fax will be sent to your fax machine. Fax pages
will remain in memory until they have been successfully delivered.
Waiting pages in the memory are indicated by the status LED flashing
and can be retrieved by using code
F9. If the fax memory is full, the
power LED flashes irregularly and new incoming fax calls will be rejec-
ted. Fax reception can be disabled or reenabled independent from the
fax configuration procedure:
Resetting the fax memory
The function
M1 deletes all outgoing faxes which have not yet been
sent and incoming faxes which have not been printed from memory.
For this reason you should only use this function if you are absolutely
certain, that no important information will be lost. This also deletes all
waiting SMS on your SIM card if SMS functionality is enabled (please
refer to page 17).
Description Format
F3
Abort GSM fax transmission ***
F4
Enable successful transmission confirma-
tion (default) * 15 #
F5
Disable successful transmission confirma-
tion # 15 #
F6
Manually declare fax mode for outgoing
transmission (normally not necessary) ### NUMBER
Description Format
F7
Disable fax reception (rejects all incoming
faxes) # 11 #
F8
Reenable fax reception * 11 #
F9
Get waiting faxes from memory * 12 #
M1
Clear fax and/or SMS memory * 160016 #