GE 681131689465 - Manual (Page 4)

Lid operation
To install tlie lid, simplv locate in tlie guides and slide tlie spring into tlie slot.
Close tlie lid by pressing down in die center and ensure locking catch is fully
engaged.
Press die lid release button, die lid is spring loaded and will rise up on its own.
In die upper pcsidon die lid will lift out of its guides at die back for easy deaning.
To replace, locate in die guides and slide back in to posidon.
Basket operation
The handles are renioiable so diey can be attached to die 2 small or 1 large basket.
• Removal of iiandles -
Press die handle down straigh t against die spring and pull away from die basket
to renios'e.
Note: Please place die basket on table and hold die basket firmly widi one hand.
Push down hard on die handle undl a "click” sound is heard to remove
basket(s).
• Attaciiing tlie liaiidle to a ba.
.\lign die handle widi die slots of die basket, push in and then pull straight
upwards against die spring.
' Basket Insertion and Positioning -
Widi die lid open, die basket can be raised into die rest/draining posidon or
removed conipletelv.
Wlien lowering die basket into die fryer, posidon die basket handles over die
guide rails on die front of die fryer. This will put die basket into die rest/draining
posidai. When in die rest/draining position, die baskethandle is autoniaticallv
locked on die basket rest lip (shown by arrow). Press die basket release button to
lower die basket into die cooking posidon.
Wlien using die large single basket, bodi basket release buttons must be pressed
to allowdie basket to lower into die oil.