GE SmartWater PNRV12 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTING THE AUXn JARY TANK—FOR MODEL PNRV18
1.
Turn off' the water supply to the Reverse Osmosis system by
dosing (clockwise rotation) the
water supply valve
(Fig. 9). Shut
off the water from the Reverse Osmosis tank of the postfilter by
closing the
RED tank shutoff valve
{Fig. 10). Lift the lever on the
RO water faucet
located
on the sink or cotintertop. Let water
drain from the system. C3ose the faucet when the water has
stopped flowing.
Unscrew the 3/8" tubing from the top of the postfilter. Using
one of the 3/8" tee fittings from the parts bag, connect the
fitting to the end of the tube that was attaclied to the inlet of
the postfilter. Using the 12" section of the 3/8" orange tubing
(prodded), connect the tee fitting to the postfilter (Fig. 11).
Remove the
icemaker storage tank
from its packing. Connect
the tank adapter to tlie tank. Use Teflon”' tape on the threads.
Connect the tank to tlie tee fitting using the 6 ft length of
orange tubing.